8680mm (w) x 4550mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T-shaped glass partition kit measuring 8680mm wide across the front with a 4550mm divider running back from it. It costs from £3,452.44 excluding VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. The complete partition components are supplied. Suitable fixings for the existing floor and ceiling structure are required separately.

The kit contains 7 glass panels in the front run and 5 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 27.1 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, typically within 7–10 working days.

About this size

A T-shaped glass partition wall, 8680mm across the front with a 4550mm divider. Two full-height frameless doors sit in the front run. It is the middle of the range and the size most offices arrive at once the finished opening has been accurately measured.

Price

£3,452.44 excluding VAT at 2050mm, rising to £4,039.85 at 2600mm. Black handles and hinges add £82.34. Delivery is £100 excluding VAT per order, regardless of the number of partitions included.

For comparison, a supply and fit quote for a partition this size normally runs to several times the kit price once labour, site time and contract preliminaries are included. Buying the kit and fitting it yourself is the cheaper route where a competent installation team is available.

Finishes available

All four channel colours cost the same, so select the finish to suit the interior scheme. Silver and anthracite are most common in offices, black in retail and hospitality. Door ironmongery is satin stainless or black, black adding £82.34 for the two doors.

Handling and fitting

This configuration includes a substantial quantity of glass. 12 panels and two door leaves require planned mechanical or team handling, so allow an appropriate handling team and confirm site access before delivery. Check delivery access, doorways and stairways before ordering.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing the position of each panel.

Acoustics

Glass partitions reduce noise, they do not stop it, and a frameless door leaves a gap around the leaf. For higher acoustic performance, a framed door with 12.8mm acoustic laminate is the specification. The calculator prices that configuration.

How long does it take?

Mainland UK delivery typically within 7–10 working days, because the glass is made to your height rather than pulled off a shelf. Delivery is £100 excluding VAT per order, not per partition.

Does the divider have to be central?

No. A central divider is not required. The divider position is set during installation, allowing unequal room sizes where required. The only constraints are that it cannot sit on a dry join between panels and it needs 150mm of clearance from a door.

Kit contents

• 10mm toughened safety glass to BS EN 12600
• 7 panels in the front run, 5 in the divider, plus 250mm infills at the doors
• Two 900mm frameless glass door leaves
• Hydraulic floor pivots, top patches and 800mm H handles
• Ceiling, floor and wall channel with gaskets
• Dry joins throughout and one abutment join for the divider

Common applications

Retail glass partitions as often as office ones. Dividing a shop floor by department, screening a stockroom, separating a restaurant into two areas without losing sight lines across the room.

Getting the height right

The dropdown covers 2050mm to 2600mm. Take measurements at both ends of the run and in the middle, and specify the smallest measurement. If none of the twelve matches, the calculator prices your exact size and gives you a scale drawing with it.

Nearest other sizes

• 7775mm x 4550mm, a narrower front run
• 8680mm x 5455mm, a deeper divider
• 8680mm x 3645mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T-shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before ordering.