FAST DELIVERY - LOW COST - EVERYTHING CALCULATED FOR YOU
Glass Partitions with Door Frames
Glass Partitions with Door Frames
Aluminium-framed door systems for glass partitions where a defined doorway, improved sealing or acoustic performance is required. Configure the partition, door and frame to suit your opening and order the complete system online.
Framed Glass Door System
The frameless toughened glass door leaf closes against an aluminium door frame, with the partition glass locating into channels within the frame. Framed doors open one way and normally stop at 90 degrees, unlike frameless doors which can swing both ways. Special hinges are available if the door needs to open back further.
Single or Double Doors
Available with single or double glass doors. Maximum standard door width is 950mm. Double doors have a 5mm centre gap, so they provide less acoustic separation than a single framed door.
Suitable for Acoustic Glass
The partition can use 10mm or 12mm toughened glass, or 12.8mm acoustic laminated glass. The door leaf itself is toughened glass for strength and a clean exposed edge.
Door Frame Options
Frame material: Aluminium
Finishes: Silver, black, white or anthracite
Maximum partition height: 3000mm
Maximum door width: 950mm
Door handing: Left or right handed
Layouts: Full-height door or transom panel above
Hinges: Free-swinging or hydraulic side-mounted
Glass compatibility: Gaskets supplied to suit the selected partition glass
Full Height or Transom
Door frames can be supplied full height or with a glass panel above the door. For openings above approximately 2300mm, an overhead transom panel is often recommended to reduce the size and weight of the door assembly.
Door Hardware Options
Framed doors can be supplied with free-swinging hinges or hydraulic side-mounted hinges. Lever-latch framed doors are also available, although these usually add around 3 working days because the frame must be milled for the strike plate.
Specialist acoustic doors can also be supplied for projects requiring higher acoustic performance, but these have significantly longer lead times and higher cost.