Glass Partitioning System with Glass Doors-2050mm (h) x 7765mm (w) x 5445mm (d).

7765mm (w) x 5445mm (d) T-Shaped Glass Partition Divider | 2 Doors

Glass Partitioning System with Glass Doors-2050mm (h) x 7765mm (w) x 3635mm (d).

7765mm (w) x 3635mm (d) T-Shaped Glass Partition Divider | 2 Doors

7765mm (w) x 4540mm (d) T-Shaped Glass Partition Divider | 2 Doors

£3,895.81 £3,246.51

Six panels along the front and five on the divider, 7765mm by 4540mm. A large kit that still fits a normal delivery. From £3,895.81 inc VAT.

SKU
TPD5D
7765mm (w) x 4540mm (d) T-Shaped Glass Partition Divider | 2 Doors is available to buy in increments of 1

This is a complete T shaped glass partition kit measuring 7765mm wide across the front with a 4540mm divider running back from it. It costs from £3,895.81 including VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. Nothing else is needed except fixings into your own floor and ceiling.

The kit contains 6 glass panels in the front run and 5 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 25.2 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, in as little as seven working days.

About this size

A T shaped glass partition wall, 7765mm across the front with a 4540mm divider. Two full height frameless doors sit in the front run. It is the middle of the range and the size most offices arrive at once they have measured properly.

What it costs

Prices start at £3,895.81 including VAT and top out at £4,651.23 for the tallest ceiling with black ironmongery. A 2400mm ceiling, which is the most common, comes to £4,313.65.

The price on this page is the full kit price. It is not a starting point that grows once someone has been to site. Glass, aluminium, gaskets, joins and ironmongery are all in it, and the only extra is £100 plus VAT for delivery, charged once per order.

Does the divider have to be central?

No, and it rarely is. Because you set the position on site you are not committing to two equal rooms. The only constraints are that it cannot sit on a dry join between panels and it needs 150mm of clearance from a door.

Kit contents

  • 10mm toughened safety glass to BS EN 12600
  • 6 panels in the front run, 5 in the divider, plus 250mm infills at the doors
  • Two 900mm frameless glass door leaves
  • Hydraulic floor pivots, top patches and 800mm H handles
  • Ceiling, floor and wall channel with gaskets
  • Dry joins throughout and one abutment join for the divider

Where this size works

Healthcare and education both use this layout, where supervision through the wall matters and a solid partition would cause more problems than it solves. Glass is also easier to keep clean than a painted stud wall.

Height options

2050mm up to 2600mm in 50mm increments. Measure your opening in more than one place and work from the smallest figure, because floors and ceilings are rarely level. Anything taller than 2600mm, or a size in between, goes through the calculator.

Channel and ironmongery

Powder coated aluminium in four RAL finishes with no price difference between them. The ironmongery is a separate choice: satin stainless included, or black for £98.81.

Handling and fitting

This is a large kit. 11 panels plus two door leaves is more glass than two people will comfortably move in a day, so plan for three or four on site and think about access before delivery. Panels of this height are awkward through a standard doorway and worse up a stairwell.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing where every panel goes.

Sound between the rooms

Fine for a quiet room, not right for an HR office. The gap around a frameless door leaf is unavoidable. For meeting rooms where that is not good enough, use a framed door with acoustic laminate, priced through the calculator.

Lead time and delivery

In as little as seven working days. One delivery charge of £100 plus VAT per order however many kits are on it, which is worth knowing if you are buying more than one.

Nearest other sizes

Or price any size with the glass partition calculator, which covers straight, corner and T shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before you order.

More Information
Weight 646.012500
Colour Clear
Opening Width 7-8m
Depth 4-5m
Write Your Own Review
You're reviewing:7765mm (w) x 4540mm (d) T-Shaped Glass Partition Divider | 2 Doors
Your Rating

No Related Posts