7775mm (w) x 4550mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T-shaped glass partition kit measuring 7775mm wide across the front with a 4550mm divider running back from it. It costs from £3,246.51 excluding VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. The complete partition components are supplied. Suitable fixings for the existing floor and ceiling structure are required separately.

The kit contains 6 glass panels in the front run and 5 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 25.2 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, typically within 7–10 working days.

About this size

A T-shaped glass partition wall, 7775mm across the front with a 4550mm divider. Two full-height frameless doors sit in the front run. It is the middle of the range and the size most offices arrive at once the finished opening has been accurately measured.

What it costs

Prices start at £3,246.51 excluding VAT and top out at £3,876.03 for the tallest ceiling with black ironmongery. A 2400mm ceiling, which is the most common, comes to £3,594.71.

The price shown is for the complete kit at the selected specification. Glass, aluminium channels, gaskets, joins and ironmongery are included, and the only extra is £100 excluding VAT for delivery, charged once per order.

Does the divider have to be central?

No. A central divider is not required. The divider position is set during installation, allowing unequal room sizes where required. The only constraints are that it cannot sit on a dry join between panels and it needs 150mm of clearance from a door.

Kit contents

• 10mm toughened safety glass to BS EN 12600
• 6 panels in the front run, 5 in the divider, plus 250mm infills at the doors
• Two 900mm frameless glass door leaves
• Hydraulic floor pivots, top patches and 800mm H handles
• Ceiling, floor and wall channel with gaskets
• Dry joins throughout and one abutment join for the divider

Where this size works

Healthcare and education both use this layout, where supervision through the wall matters and a solid partition would cause more problems than it solves. Glass is also easier to keep clean than a painted stud wall.

Height options

2050mm up to 2600mm in 50mm increments. Measure your opening in more than one place and work from the smallest figure, because floors and ceilings are rarely level. Anything taller than 2600mm, or a size in between, goes through the calculator.

Channel and ironmongery

Powder coated aluminium in four RAL finishes with no price difference between them. The ironmongery is a separate choice: satin stainless included, or black for £82.34.

Handling and fitting

This configuration includes a substantial quantity of glass. 11 panels and two door leaves require planned mechanical or team handling, so allow an appropriate handling team and confirm site access before delivery. Check delivery access, doorways and stairways before ordering.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing the position of each panel.

Sound between the rooms

This frameless system is suitable where moderate speech privacy is acceptable, but it is not intended for confidential rooms. The gap around a frameless door leaf is unavoidable. For meeting rooms where higher acoustic performance is required, use a framed door with acoustic laminate, priced through the calculator.

Lead time and delivery

Typically within 7–10 working days. One delivery charge of £100 excluding VAT per order regardless of the number of kits included, which can reduce delivery cost across multi-kit orders.

Nearest other sizes

• 8680mm x 4550mm, a wider front run
• 6870mm x 4550mm, a narrower front run
• 7775mm x 5455mm, a deeper divider
• 7775mm x 3645mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T-shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before ordering.