8680mm (w) x 5455mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T-shaped glass partition kit measuring 8680mm wide across the front with a 5455mm divider running back from it. It costs from £3,602.43 excluding VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. The complete partition components are supplied. Suitable fixings for the existing floor and ceiling structure are required separately.

The kit contains 7 glass panels in the front run and 6 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 28.9 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, typically within 7–10 working days.

About this size

The largest T-shaped partition we make as a fixed size. 8680mm across the front, 5455mm deep on the divider, 13 panels of glass in total. This divides a whole floorplate rather than a corner of one, and requires suitable access and handling arrangements.

What it costs

Prices start at £3,602.43 excluding VAT and top out at £4,312.43 for the tallest ceiling with black ironmongery. A 2400mm ceiling, which is the most common, comes to £4,001.86.

The price shown is for the complete kit at the selected specification. Glass, aluminium channels, gaskets, joins and ironmongery are included, and the only extra is £100 excluding VAT for delivery, charged once per order.

Handling and fitting

This configuration includes a substantial quantity of glass. 13 panels and two door leaves require planned mechanical or team handling, so allow an appropriate handling team and confirm site access before delivery. Check delivery access, doorways and stairways before ordering.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing the position of each panel.

Sound between the rooms

This frameless system is suitable where moderate speech privacy is acceptable, but it is not intended for confidential rooms. The gap around a frameless door leaf is unavoidable. For meeting rooms where higher acoustic performance is required, use a framed door with acoustic laminate, priced through the calculator.

Lead time and delivery

Typically within 7–10 working days. One delivery charge of £100 excluding VAT per order regardless of the number of kits included, which can reduce delivery cost across multi-kit orders.

Positioning the divider

A common assumption is that the divider is centred. It is not. Position it to suit the required room layout, avoiding the dry joins between panels and keeping 150mm away from any door leaf.

Everything included

Glass and framing components are supplied together as a complete kit. The kit includes 13 glass panels, both door leaves and all required aluminium channels, the gaskets that go into the channel cleats, all dry joins, the abutment join for the divider, and the full set of door ironmongery in your chosen finish.

Suitable structural fixings must be selected separately for the existing floor and ceiling construction.

Where this size works

Healthcare and education both use this layout, where supervision through the wall matters and a solid partition would cause more problems than it solves. Glass is also easier to keep clean than a painted stud wall.

Ceiling height

Twelve sizes between 2050mm and 2600mm. Above 2600mm the glass has to move to 12mm, which changes the price significantly, so taller openings are priced through the calculator rather than here.

Channel and ironmongery

Powder coated aluminium in four RAL finishes with no price difference between them. The ironmongery is a separate choice: satin stainless included, or black for £82.34.

Nearest other sizes

• 7775mm x 5455mm, a narrower front run
• 8680mm x 6360mm, a deeper divider
• 8680mm x 4550mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T-shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before ordering.