6870mm (w) x 4550mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T-shaped glass partition kit measuring 6870mm wide across the front with a 4550mm divider running back from it. It costs from £3,096.52 excluding VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. The complete partition components are supplied. Suitable fixings for the existing floor and ceiling structure are required separately.

The kit contains 5 glass panels in the front run and 5 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 23.4 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, typically within 7–10 working days.

About this size

A T-shaped glass partition wall, 6870mm across the front with a 4550mm divider. Two full-height frameless doors sit in the front run. It is the middle of the range and the size most offices arrive at once the finished opening has been accurately measured.

How much does this glass partition cost?

Between £3,096.52 and £3,685.78 excluding VAT, depending on the ceiling height you choose and whether you want black ironmongery. At the most common height of 2400mm it is £3,419.11 with satin stainless handles.

That works out at roughly £132.33 per square metre of glass, which is the figure worth comparing against when you get a quote from an installer. It includes everything except fitting and the fixings into your own structure. Delivery is charged once per order at £100 excluding VAT, regardless of the number of kits included.

Choosing your height

Twelve heights, 2050mm to 2600mm in 50mm steps. Pick yours from the dropdown and the price updates. If your ceiling falls between two of them, or is above 2600mm, use the glass partition calculator and we will manufacture it to the required measurement.

Colours

Channel in silver RAL 9006, white RAL 9010, black RAL 9005 or anthracite RAL 7016, all the same price. Handles and hinges are satin stainless as standard, black for £82.34.

Fitting it

The glass is made to size, so the work is setting out, cutting and fixing the channel, then glazing. Channel is supplied in 3m lengths and cut as you go.

How much sound does it stop?

The frameless system provides moderate speech privacy but is not intended for confidential rooms. Frameless doors have a small physical gap around the leaf by design, so they are not an acoustic solution. Where sound matters more than the frameless look, specify a framed door and 12.8mm acoustic laminate, which you can price in the calculator.

Delivery

Nationwide, typically within 7–10 working days from order. Delivery is £100 excluding VAT charged once per order rather than per partition, with no additional delivery charge for a second kit on the same order.

Does the divider have to be central?

No. A central divider is not required. The divider position is set during installation, allowing unequal room sizes where required. The only constraints are that it cannot sit on a dry join between panels and it needs 150mm of clearance from a door.

Kit contents

• 10mm toughened safety glass to BS EN 12600
• 5 panels in the front run, 5 in the divider, plus 250mm infills at the doors
• Two 900mm frameless glass door leaves
• Hydraulic floor pivots, top patches and 800mm H handles
• Ceiling, floor and wall channel with gaskets
• Dry joins throughout and one abutment join for the divider

Typical use

At 6870 by 4550 this configuration is suitable for open-plan offices that need two meeting rooms rather than one large one. The glass keeps daylight moving through the floor, which is normally the reason for choosing glass office partitions over stud in the first place.

Nearest other sizes

• 7775mm x 4550mm, a wider front run
• 5965mm x 4550mm, a narrower front run
• 6870mm x 5455mm, a deeper divider
• 6870mm x 3645mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T-shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before ordering.