6870mm (w) x 6360mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T-shaped glass partition kit measuring 6870mm wide across the front with a 6360mm divider running back from it. It costs from £3,500.40 excluding VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. The complete partition components are supplied. Suitable fixings for the existing floor and ceiling structure are required separately.

The kit contains 5 glass panels in the front run and 7 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 27.1 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, typically within 7–10 working days.

About this size

A T-shaped glass partition wall, 6870mm across the front with a 6360mm divider. Two full-height frameless doors sit in the front run. It is the middle of the range and the size most offices arrive at once the finished opening has been accurately measured.

What it costs

Prices start at £3,500.40 excluding VAT and top out at £4,170.16 for the tallest ceiling with black ironmongery. A 2400mm ceiling, which is the most common, comes to £3,874.21.

The price shown is for the complete kit at the selected specification. Glass, aluminium channels, gaskets, joins and ironmongery are included, and the only extra is £100 excluding VAT for delivery, charged once per order.

Handling and fitting

This configuration includes a substantial quantity of glass. 12 panels and two door leaves require planned mechanical or team handling, so allow an appropriate handling team and confirm site access before delivery. Check delivery access, doorways and stairways before ordering.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing the position of each panel.

Sound between the rooms

This frameless system is suitable where moderate speech privacy is acceptable, but it is not intended for confidential rooms. The gap around a frameless door leaf is unavoidable. For meeting rooms where higher acoustic performance is required, use a framed door with acoustic laminate, priced through the calculator.

Lead time and delivery

Typically within 7–10 working days. One delivery charge of £100 excluding VAT per order regardless of the number of kits included, which can reduce delivery cost across multi-kit orders.

Deciding the layout on site

Install the front run first, then position the divider to suit the required room layout. It must miss the dry joins between panels and stay 150mm clear of the doors. Subject to these requirements, the divider position can be selected to suit the room layout.

Supplied with the kit

• 10mm toughened glass, cut to size, BS EN 12600
• Two full-height frameless doors, 900mm each
• Self closing hydraulic floor pivots and transom patches
• 800mm H handles in satin stainless or black
• 30mm powder coated aluminium channel throughout
• Gaskets, dry joins and the divider abutment join

What it suits

A 6360mm divider is deep enough to make two rooms that work independently. Consulting rooms, private offices, quiet rooms off a main floor. Anywhere two people need to talk without being overheard while the space still feels open.

Getting the height right

The dropdown covers 2050mm to 2600mm. Take measurements at both ends of the run and in the middle, and specify the smallest measurement. If none of the twelve matches, the calculator prices your exact size and gives you a scale drawing with it.

Channel and ironmongery

Powder coated aluminium in four RAL finishes with no price difference between them. The ironmongery is a separate choice: satin stainless included, or black for £82.34.

Nearest other sizes

• 7775mm x 6360mm, a wider front run
• 5965mm x 6360mm, a narrower front run
• 6870mm x 5455mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T-shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before ordering.