7765mm (w) x 6350mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T shaped glass partition kit measuring 7765mm wide across the front with a 6350mm divider running back from it. It costs from £4,380.47 including VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. Nothing else is needed except fixings into your own floor and ceiling.

The kit contains 6 glass panels in the front run and 7 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 28.9 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, in as little as seven working days.

About this size

The largest T shaped partition we make as a fixed size. 7765mm across the front, 6350mm deep on the divider, 13 panels of glass in total. This divides a whole floorplate rather than a corner of one, and the handling notes below are worth reading before you order.

Price

£4,380.47 including VAT at 2050mm, rising to £5,133.66 at 2600mm. Black handles and hinges add £98.81. There is nothing else to add except the £100 plus VAT delivery, which is per order rather than per partition.

For comparison, a supply and fit quote for a partition this size normally runs to several times the kit price once labour, site time and contract preliminaries are included. Buying the kit and fitting it yourself is the cheaper route if you have the people.

Supplied with the kit

• 10mm toughened glass, cut to size, BS EN 12600
• Two full height frameless doors, 900mm each
• Self closing hydraulic floor pivots and transom patches
• 800mm H handles in satin stainless or black
• 30mm powder coated aluminium channel throughout
• Gaskets, dry joins and the divider abutment join

Where these end up

Mostly offices, but a good proportion go into showrooms and salons where the point is to divide the space without making it feel smaller. The T shape works well where one long wall is fixed and you need to break up what sits behind it.

Ceiling height

Twelve sizes between 2050mm and 2600mm. Above 2600mm the glass has to move to 12mm, which changes the price significantly, so taller openings are priced through the calculator rather than here.

Finishes available

All four channel colours cost the same, so choose on looks rather than budget. Silver and anthracite are most common in offices, black in retail and hospitality. Door ironmongery is satin stainless or black, black adding £98.81 for the two doors.

Handling and fitting

This is a large kit. 13 panels plus two door leaves is more glass than two people will comfortably move in a day, so plan for three or four on site and think about access before delivery. Panels of this height are awkward through a standard doorway and worse up a stairwell.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing where every panel goes.

Acoustics

Glass partitions reduce noise, they do not stop it, and a frameless door leaves a gap around the leaf. For real separation between the two rooms, a framed door with 12.8mm acoustic laminate is the specification. The calculator prices that configuration.

How long does it take?

Mainland UK delivery in as little as seven working days, because the glass is made to your height rather than pulled off a shelf. Delivery is £100 plus VAT per order, not per partition.

Deciding the layout on site

Fit the front run first, then place the divider where the space needs it rather than where a drawing says. It must miss the dry joins between panels and stay 150mm clear of the doors. Beyond that, anywhere along the run works.

Nearest other sizes

• 8670mm x 6350mm, a wider front run
• 6860mm x 6350mm, a narrower front run
• 7765mm x 5445mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before you order.