6860mm (w) x 6350mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T shaped glass partition kit measuring 6860mm wide across the front with a 6350mm divider running back from it. It costs from £4,200.48 including VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. Nothing else is needed except fixings into your own floor and ceiling.

The kit contains 5 glass panels in the front run and 7 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 27.1 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, in as little as seven working days.

About this size

A T shaped glass partition wall, 6860mm across the front with a 6350mm divider. Two full height frameless doors sit in the front run. It is the middle of the range and the size most offices arrive at once they have measured properly.

What it costs

Prices start at £4,200.48 including VAT and top out at £5,004.19 for the tallest ceiling with black ironmongery. A 2400mm ceiling, which is the most common, comes to £4,649.05.

The price on this page is the full kit price. It is not a starting point that grows once someone has been to site. Glass, aluminium, gaskets, joins and ironmongery are all in it, and the only extra is £100 plus VAT for delivery, charged once per order.

Handling and fitting

This is a large kit. 12 panels plus two door leaves is more glass than two people will comfortably move in a day, so plan for three or four on site and think about access before delivery. Panels of this height are awkward through a standard doorway and worse up a stairwell.

The glass arrives at its finished size, so there is no cutting or drilling of glass on site. The aluminium channel comes in 3m lengths and is cut to suit as you fit it, and the kit includes a drawing showing where every panel goes.

Sound between the rooms

Fine for a quiet room, not right for an HR office. The gap around a frameless door leaf is unavoidable. For meeting rooms where that is not good enough, use a framed door with acoustic laminate, priced through the calculator.

Lead time and delivery

In as little as seven working days. One delivery charge of £100 plus VAT per order however many kits are on it, which is worth knowing if you are buying more than one.

Deciding the layout on site

Fit the front run first, then place the divider where the space needs it rather than where a drawing says. It must miss the dry joins between panels and stay 150mm clear of the doors. Beyond that, anywhere along the run works.

Supplied with the kit

• 10mm toughened glass, cut to size, BS EN 12600
• Two full height frameless doors, 900mm each
• Self closing hydraulic floor pivots and transom patches
• 800mm H handles in satin stainless or black
• 30mm powder coated aluminium channel throughout
• Gaskets, dry joins and the divider abutment join

What it suits

A 6350mm divider is deep enough to make two rooms that work independently. Consulting rooms, private offices, quiet rooms off a main floor. Anywhere two people need to talk without being overheard while the space still feels open.

Getting the height right

The dropdown covers 2050mm to 2600mm. Take your measurement at both ends of the run and in the middle, then use the smallest. If none of the twelve matches, the calculator prices your exact size and gives you a scale drawing with it.

Channel and ironmongery

Powder coated aluminium in four RAL finishes with no price difference between them. The ironmongery is a separate choice: satin stainless included, or black for £98.81.

Nearest other sizes

• 7765mm x 6350mm, a wider front run
• 5955mm x 6350mm, a narrower front run
• 6860mm x 5445mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before you order.