5060mm (w) x 6360mm (d) T-Shaped Glass Partition Divider | 2 Doors

This is a complete T-shaped glass partition kit measuring 5060mm wide across the front with a 6360mm divider running back from it. It costs from £3,136.51 excluding VAT and includes the toughened glass, two frameless glass doors, all the aluminium channel, gaskets, joins and door ironmongery. The complete partition components are supplied. Suitable fixings for the existing floor and ceiling structure are required separately.

The kit contains 3 glass panels in the front run and 7 in the divider, plus two 900mm doors and two 250mm infill panels, giving roughly 23.4 square metres of glass at the shortest height. Choose your ceiling height from 2050mm to 2600mm and the price adjusts. Delivery is nationwide, typically within 7–10 working days.

About this size

Deeper than it is wide. The 5060mm front run carries both doors and the divider runs 6360mm back from it, far enough to make two genuinely separate rooms rather than two alcoves. Suits a long narrow floorplate where you are working with the depth you have rather than the width.

Price

£3,136.51 excluding VAT at 2050mm, rising to £3,643.43 at 2600mm. Black handles and hinges add £82.34. Delivery is £100 excluding VAT per order, regardless of the number of partitions included.

For comparison, a supply and fit quote for a partition this size normally runs to several times the kit price once labour, site time and contract preliminaries are included. Buying the kit and fitting it yourself is the cheaper route where a competent installation team is available.

Finishes available

All four channel colours cost the same, so select the finish to suit the interior scheme. Silver and anthracite are most common in offices, black in retail and hospitality. Door ironmongery is satin stainless or black, black adding £82.34 for the two doors.

Fitting it

The glass is made to size, so the work is setting out, cutting and fixing the channel, then glazing. Channel is supplied in 3m lengths and cut as you go.

Acoustics

Glass partitions reduce noise, they do not stop it, and a frameless door leaves a gap around the leaf. For higher acoustic performance, a framed door with 12.8mm acoustic laminate is the specification. The calculator prices that configuration.

How long does it take?

Mainland UK delivery typically within 7–10 working days, because the glass is made to your height rather than pulled off a shelf. Delivery is £100 excluding VAT per order, not per partition.

Deciding the layout on site

Install the front run first, then position the divider to suit the required room layout. It must miss the dry joins between panels and stay 150mm clear of the doors. Subject to these requirements, the divider position can be selected to suit the room layout.

Supplied with the kit

• 10mm toughened glass, cut to size, BS EN 12600
• Two full-height frameless doors, 900mm each
• Self closing hydraulic floor pivots and transom patches
• 800mm H handles in satin stainless or black
• 30mm powder coated aluminium channel throughout
• Gaskets, dry joins and the divider abutment join

Common applications

Retail glass partitions as often as office ones. Dividing a shop floor by department, screening a stockroom, separating a restaurant into two areas without losing sight lines across the room.

Choosing your height

Twelve heights, 2050mm to 2600mm in 50mm steps. Pick yours from the dropdown and the price updates. If your ceiling falls between two of them, or is above 2600mm, use the glass partition calculator and we will manufacture it to the required measurement.

Nearest other sizes

• 5965mm x 6360mm, a wider front run
• 5060mm x 5455mm, a shallower divider

Or price any size with the glass partition calculator, which covers straight, corner and T-shaped layouts and gives you a scale drawing, a full materials list and the channel cut lengths before ordering.