4805mm (w) x 1835mm (d) Corner Glass Partition Kit | Pivot Door

Make the finished opening 2050mm high x 4805mm wide x 1835mm deep for the base option. Choose a finished height from 2050mm to 2700mm online. This L-shaped kit is sized for a team room, conference room or open-plan office divider.

4805x1835mm Corner Glass Partition Kit

A 4805x1835mm corner glass partition covering 8.8m². The 4805mm front wall has a 250mm infill, the 900mm door, then four 900mm glass panels — nearly 5 metres of glass frontage. The shorter 1835mm return has two 896mm panels closing off the side.

What's in This Kit

Width wall (4805mm) — door to one side:

• 1x 250mm infill panel (next to the wall)
• 1x 900mm frameless pivot door
• 4x 900mm glass panels

Depth wall (1835mm):

• 2x 896mm glass panels

Hardware:

• 3x ceiling U-channel (3m lengths, 30mm profile)
• 5x floor and wall channel (3m lengths, 2-part)
• 16x fin gaskets
• 4x 180° dry joins
• 1x 90° corner dry join
• 1x 800mm guardsman handle
• 1x hydraulic self-closing floor hinge
• 1x blanking plate

All glass is 10mm toughened to BS6206/BS EN 12600. Panel heights are cut 25mm shorter than your selected ceiling height to allow for the channel depth.

Heights and Colours

Select your ceiling height from the dropdown above — 2050mm to 2700mm in 50mm steps. The price adjusts automatically. Channels come in Silver (RAL 9006), Black (RAL 9005), Anthracite Grey (RAL 7016) or White (RAL 9010) at no extra cost. Door handle and hinges are satin stainless steel as standard, with a black upgrade option.

How It Goes Together

The two glass walls meet at a 90° corner joint. You mitre the channels at the corner (45° cut where they meet at 90°) but at wall abutments, cut the channels square; mitred cuts are required only at the 90° corner. Allow 15mm clearance next to walls and at corners, 4mm for each dry join between glass panels, and leave a 910mm gap in the floor channel where the door goes (900mm door plus 5mm clearance each side). Full instructions in our fitting guide.

Need a Different Size?

Where this fixed layout does not match the required dimensions, use our glass partition calculator to obtain an accurate price for an L-shaped configuration made to the required dimensions. For projects where glass is sourced locally, you can also buy channels and hardware separately for next-day delivery.

Before You Order

The sizes above are finished tight opening sizes after flooring and wall finishes. The 30mm aluminium channels are supplied in 3m lengths and must be measured, cut and drilled on site. The toughened glass arrives at its finished size and cannot be cut or drilled during installation.

For measuring and fitting advice, read the glass partition fitting guide. Where this fixed size does not match the finished opening, use the glass partition calculator for made-to-measure 10mm, 12mm or acoustic glass options. You can also compare other glass partition kits.