Abutment Glass Partition Joining Strips For 12mm Glass

Abutment Glass Partition Joining Strips For 12mm Glass Partitions - Dry Joins. 3m Lengths.

These joining strips will give you a uniform 4.5mm between glass partition panels. Pull off the adhesive strip on either side and place between the glass panels. 

If you need more flexible spacing between panels, you can use silicone for a 3-6mm gap.

These joining strips are for 12mm glass partitioning where a glass panel end meets the face of another partition.

We also stock the following dry joins for other configurations:

10mm Glass Joining Strips:

180° Glass Joining Strips for 10mm toughened glass partitions- Inline panels.

90° Glass Joining Strips for 10mm toughened glass partitions-  Corner joins

Abutment Glass Joining Strips for 10mm toughened glass partitions- Edge to face

12mm Glass Joining Strips:

180° Glass Joining Strips for 12mm toughened glass partitions- Inline panels.

90° Glass Joining Strips for 12mm toughened glass partitions-  Corner joins

Abutment Glass Joining Strips for 12mm toughened glass partitions- Edge to face

If you are unsure which dry joins are right for your project, please email us:

sales@nationalglasspartitions.co.uk