2240x250x10mm Toughened Glass Partition Panel - Glass for Partition

This 2240 x 250 x 10mm toughened glass partition panel is an actual finished glass size, not an opening size. It is a tall, narrow slim glass infill panel for a narrow side panel or replacement pane in a modular partition.

Supplied Panel

• 1 x clear 10mm toughened safety-glass panel
• Finished size: 2240mm high x 250mm wide
• Approximate glass area: 0.56m²
• Approximate glass weight: 14.0kg

This is glass only. Aluminium channel, gaskets, joining strips, door hardware and installation fixings are not included. The panel has no holes or cut-outs.

Check the Size Carefully

Measure the glass size required by your existing system, rather than ordering from the wall opening alone. Toughened glass cannot be trimmed, drilled or altered after manufacture or on site. Check height, width, thickness and access before ordering.

Where This Size Works

At 2240mm high and 250mm wide, this panel is particularly useful as a narrow side panel or replacement pane in a modular partition. This height suits many conventional office partitions and replacement projects.

Nearby stock sizes: 2190 x 250 x 10mm panel or 2290 x 250 x 10mm panel. If you need a complete wall rather than a replacement pane, compare our glass partition kits. For a different finished size, use the glass partition calculator.

Read the glass partition fitting guide before handling or installing the panel.